SEAMLESS KNITTED GLOVES

Lightweight gloves with excellent resistance to abrasion and enhanced grip.

KEY FEATURES

Available in 13 gauge.
Ensures sufficient dexterity requirement for all kinds of material handling.
Can be customised for dotting on palm - polka dotting with PVC to enhance grip.
Seamless knitted wrist for comfort fit and ease in use.

DESIGN:

100% nylon.
Ambidextrous gloves: Indifferent to each hand.

PRODUCT MAKE :

Material :  100% Cotton

Cuff : Coloured binding

Yarn Count :  150 D

Lining : None

Piping : None

SIZE: Universal 6 7 8 9 10 11 

INDUSTRY / JOB: Construction & Civil, Material Handling, Forestry & Horticulture, Automobile & Auto Ancillary, Repairs & Maintenance, Agriculture, Forestry & Horticulture, Warehousing & Assembling, Consumer Goods (FMCG)

HAZARD / RISK: Abrasion, Dust, Vibration

PRODUCT WEIGHT: 625 gms per dozen pair
( Weight of product may vary depending on customisations )

MINIMUM ORDER QUANTITY :
Custom : --

Ready Made : 600 Pairs

HOW TO USE

Store in a cool dark place, in its original packing.
No special cleaning or maintenance is recommended for this type of gloves.

TESTS CONDUCTED

Abrasion as per EN 388 is 1: Resistance to abrasion based on the number of cycles required to abrade through the sample glove (abrasion by sandpaper under a stipulated pressure). The protection factor is then indicated on a scale from 1 to 4 depending on how many revolutions are required to make a hole in the material. The higher the number, the better the gloves.
Cut as per EN 388 is X: Blade cut resistance based on the number of cycles required to cut through the sample at a constant speed. The protection factor is then indicated on a scale from 1 to 5.
Tear as per EN 388 is 2: Tear resistances based on the amount of force required to tear the sample. The protection factor is then indicated on a scale from 1 to 4.
Puncture as per EN 388 is X: Puncture resistances based on the amount of force required to pierce the sample with a standardly sized point. The protection factor is then indicated on a scale from 1 to 4.
TDM blade cut resistant as per EN 388 is X (X means not tested): The glove sample is placed on a conductive strip and loaded onto the TDM-100. When the metal blade touches the metal strip, the test is terminated. A straight blade is loaded into the machine. Weight is added to serve as a force. The blade moves across the fabric. The blade is replaced with a new one to ensure accuracy. The sample is cut five times, each with three different loads. The distance traveled to cause cut through at various forces is recorded. The data is used to determine the load required to cut through the sample.

REMARKS

This glove can be used effectively to resist abrasion and dirt.
Lightweight gloves along with binding ensure comfort.